Ghost Busters: Eliminating non-existent STC numbers for Early English Books: Difference between revisions

(→‎Editing the Voyager Record: Added instructions for updating microfilm records)
(→‎Editing the Voyager Record: Added ConsDB step)
Line 45: Line 45:
# Add a 583 to the Bib record, for statistical purposes; change number of pieces from "1" to however many flags you need to make, if more than one; update the month when needed. <code>‡a upgraded ‡c 2016-06 ‡k EJE ‡n 1 ‡o piece ‡x Ghost Busters project ‡2 local ‡5 DFo</code>
# Add a 583 to the Bib record, for statistical purposes; change number of pieces from "1" to however many flags you need to make, if more than one; update the month when needed. <code>‡a upgraded ‡c 2016-06 ‡k EJE ‡n 1 ‡o piece ‡x Ghost Busters project ‡2 local ‡5 DFo</code>
# If the STC has a corresponding microfilm, change the microfilm record as follows: "$z Microfilm of STC *new number*, formerly STC *old number*, etc. "
# If the STC has a corresponding microfilm, change the microfilm record as follows: "$z Microfilm of STC *new number*, formerly STC *old number*, etc. "
# If the STC has an Awaiting Conservation flag, open the Conservation Database and change the call number to "STC *new number*, formerly STC *old number*"


=== Physical Processing ===
=== Physical Processing ===

Revision as of 16:11, 10 June 2016

This project is designed for participants in the University of Michigan School of Information's Alternative Spring Break program. Students will handle rare books dating to the 16th and early 17th century in order to update call numbers in the book and in the online catalog to the current standard, eliminating "ghost" call numbers. They will become familiar with rare book handling, the Voyager ILS cataloging module, the STC classification system, and the history of handpress era books. This project will have a significant impact on scholars' ability to use the Folger collection effectively.

See List of call number changes for these and other updated numbers.

Background

In many cases, the Folger owns the only known copy of a rare book, therefore the book was unknown to the compilers of the first edition of A Short-Title Catalogue of Books Printed in England, Scotland, & Ireland and of English Books Printed Abroad, 1475-1640 (better known as the "STC"). This means the books did not have an "STC number" at the time of cataloging, so the cataloger devised a number that would put it in the correct sequence on the shelf. When the 2nd edition of the STC appeared, these books received official STC numbers that often did NOT correspond with the number devised by a Folger cataloger. For example, the book with call number "STC 22459.2" on the shelf has the STC (2nd ed.) number "STC 22459a.5". Participants in this project will update online catalog records to reflect the change in numbering, and will update the physical call numbers written in the books. See "Hidden Notes, Bibliographic Nightmares, and STC Call Numbers" for a blog post on The Collation that touches on this issue.

Project Outcomes

At the end of the week, participants will have handled a significant number of rare books and associated catalog records, allowing us to accurately predict the amount of time it will take to change the call numbers for all STC books with call numbers that do not match STC 2nd edition numbers. More importantly for researchers, at the end of the project the online catalog and the books themselves will display the standard STC number for each title, eliminating a huge source of confusion.

Required Skills and Abilities

Must be able to handle fragile material safely, work at a computer for an extended period of time, follow technical instructions, and work with accuracy and meticulous attention to detail.

Workflow

Retrieving Books

  1. Go to the vault, accompanied by someone with vault access
  2. Pull each book; check to see if there is a photostat next to it; if so, pull photostat as well
  3. Leave "Original" slip on shelf for the book
  4. Put "Carbon" slip inside the book, sticking up so we know it has a slip
  5. Once you have a truck full of books, bring them upstairs

Editing the Voyager Record

  1. Search Voyager Cat module using the "Keyword" Tab
    1. Click the "Limit" button of the dialog box.
    2. Click the "Location" menu
    3. Select "Deck B-STC Vault"
    4. Check the box to "Retain search limits between searches" and click "OK"
    5. Enter search in text box with all search characters enclosed in quotation marks, e.g., "STC 20441"
    6. If more than one record shows up, set the book aside to deal with later (multiple bib records indicate that there is more than one title bound in the volume; we will deal with the "bound withs" as a batch)
  2. Open the Bib record and the associated Holdings record (Use Window > Tile to show them side-by-side)
  3. In the holdings record, change 852 1st indicator to "8" if necessary
  4. Copy the STC (2nd ed.) number from the 510$c of the Bib record
  5. Paste it into a new 852$h in the Holding record (the "MFHD") and add the copy number, if necessary
  6. Change $h to $d for old call number, keeping the copy number, if present
  7. If book is a folio, add a subfield $m and write "(folio)"
  8. If present, move the 876$z into the 852
  9. Create $j and move accession number from $z into $j. Remove period from the end of the accession number. If there is no accession number, write "No case or accession number present"
  10. Find the 852 in the bib record (if there are multiple copies, make sure you get the right one)
  11. Copy and paste the contents of the MFHD 852 into the Bib 852 (leaving $a DFo alone, if present)
  12. Change the first indicator to "8" if needed
  13. Delete the 876 from the Bib record
  14. Add binding height to the 300$c: round up to the nearest centimeter, put a space between the number and the "cm" symbol (for bindings less than 10 cm high, measure in mm)
  15. Put format in parentheses and (if necessary) change abbreviation (e.g. change from $c 12⁰. to $c 13 cm (12mo). Common format abbreviations: fol. 4to8vo 12mo 32mo
  16. Add a 583 to the Bib record, for statistical purposes; change number of pieces from "1" to however many flags you need to make, if more than one; update the month when needed. ‡a upgraded ‡c 2016-06 ‡k EJE ‡n 1 ‡o piece ‡x Ghost Busters project ‡2 local ‡5 DFo
  17. If the STC has a corresponding microfilm, change the microfilm record as follows: "$z Microfilm of STC *new number*, formerly STC *old number*, etc. "
  18. If the STC has an Awaiting Conservation flag, open the Conservation Database and change the call number to "STC *new number*, formerly STC *old number*"

Physical Processing

  1. Copy and paste new call number into the flag template Word document
  2. Double-check that you have the right book
  3. Open the book to the back and find the old call number
  4. Using a dull-ish no. 1 pencil (to avoid poking a hole in the paper) draw a line through the old call number
  5. Write the new call number in the upper outer corner of the back of the book (check with Erin or Deborah if there isn't an obvious good spot to write it)
  6. On the old flag, cross out the old number and write in the new one
  7. Trim flag to size and insert in book

Checking changes

Once changes have been made, another team member should check that flags and call numbers match, and call number is legible:

  1. Check the back of the book for the changed call number and make sure it is correct. If there is an exhibition slip, correct the call number on that as well
  2. Keep old flag in book until re-shelving in case it needs to be used as a place holder for a book sent to the holding area for overflow.

Reshelving

  1. Shelve book in its new spot (if there's no room, use the flag as scrap paper: write the width of the book on it, add the note "shelved in STC holding area"; leave the flag in a dummy at the new spot; shelve the book in the holding area)
  2. Behead the old flag so you'll know it's done
  3. Use the carbon to find the original original
  4. Pull the original original
  5. Put the paired carbon and original next to each other in a dummy so that they stay in order, and so that any carbons where the originals haven't been pulled stay separate
  6. Write "Now <new call number>" on the original
  7. Stamp in the original and the carbon
  8. File the original and the carbon

Final check and statistics

Do a final check and generate a list of changes as follows: (EB: still working on this)

  1. Export all holdings updated since the previous Ghost Busters run
  2. Use MarcEdit to export 001, 852$d, and 852$h as tab-delimited
  3. Open the tab-delimited file in Excel
  4. Filter the 852$h column for cells that do not contain "STC" and delete those rows
  5. Re-filter the 852$h for cells that contain a semicolon (or whatever in-subfield delimiter was chosen in MarcEdit) to identify records with a duplicate $h; make corrections in Voyager as needed to remove duplicates (usually it's because the original $h wasn't changed to a $d)
  6. Sort by 852$h and look for blanks in the 852$d column (don't filter for blanks: it's helpful to see what's on either side of them); make corrections in Voyager if needed (delete the row if the record just happens to be an STC holding that was updated outside the project).