Setting preferences in Voyager: Difference between revisions

(→‎Cataloging module: Added "Replace on 035 match" as a profile)
(Added Template:Voyager)
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Use the settings below to customize [[Voyager ILS|Voyager]] when getting started for the first time, or setting up Voyager on a new computer. These settings are based on the Voyager 9.1 interface, and are current as of June 2016.
{{Voyager}}
 
Use the settings below to customize [[Voyager ILS|Voyager]] when getting started for the first time, or setting up Voyager on a new computer. The Cataloging module settings are based on the Voyager 9.1 interface, and are current as of June 2016. The Acquisitions module and Cataloging module for Acquisitions staff settings, and the Circulation settings, are based on the Voyager 10.1 interface, and are current as of January 2020.  


==Acquisitions module==
==Acquisitions module==
(Instructions to come)
'''Session defaults'''
* purchase order
** Ship to Acquisitions Department
** Bill to: Acquisitions Department
* Line item copies/funds
** Intended location: DeckB-Open Stacks (or DeckC-Vault or other vault)
** For this location:
*** number of copies: 1
*** ship to Acquisitions Department
*** Commit to fund: Acq 19-20/Modern (update for year and fund as appropriate)
* Holdings
** point to default holdings template: C:\Program Files (x86)\Voyager\Catalog\Template\hold.tem
 
'''Workflows'''
* searching
** Bibliographic Staff Searching/Import
*** check retain last search
*** check automatic truncation
*** character set: Latin-1 unicode
** Line items
*** check Auto-select all copies during receive
*** default extended fund allocation method: percentage
** serials check-in
*** check auto-select all copies during receive
*** check Prompt to print Bindery Pullslips
** Bibliographic standard number
*** check Bypass ISBN validation
*** check Bypass ISSN validation
*** check Bypass ISBN validation for EDI message
*** check Bypass ISSN validation for EDI message
 
=== Cataloging module settings for Acquisitions staff ===
'''General tab'''
*If you mostly work with Open stacks books
**Holding/item default location: '''DeckB-Open stacks'''
**Call number hierarchies: '''Modern-LC'''
**Bibliographic import/replace profile: '''Add unconditional'''
**Bib Overlay import/replace profile: '''(none)'''
**Authority import/replace profile: '''LCNAF'''
*If you mostly work with Vault materials
**Holding/item default location: '''DeckC-Vault''' (or other vault, if appropriate)
**Call number hierarchies: '''Rare-Acc'''
**Bibliographic import/replace profile: '''Add unconditional'''
**Bib Overlay import/replace profile: '''(none)'''
**Authority import/replace profile: '''LCNAF'''
*Check Delete records from work files...
*Check Delete records from import file...
*Check box for "Add a subfield 'a' to a new field" if preferred (this will depend on what type of editing you do most frequently in Voyager)
 
'''Validation tab'''
*Cataloging formats: '''MARC21'''
 
*Check-mark these boxes:
**Bypass MARC Validation
**Bypass MARC21 Character set validation
**Bypass Authority Control validation
**Bypass decomposition of accented characters for MARC21
**Bypass ISBN validation
**Bypass ISSN validation
 
'''Workflow tab'''
Check-mark the following:
* Retain last search
*Automatic truncation for non keyword searches
*Display record directly if search results in only one title
* Check for Duplicate Item Barcodes
* (''optional'')  Suppress confirmation message upon successful save
* Update permanent location of attached items when MFHD is saved to the database
* Update item type of attached items when MFHD is saved to the database...
* Retain hierarchy selections
 
'''Item defaults tab'''
*Select a default Item Type according to what material you work with most frequently (or leave blank if this varies).<br>
 
'''Folders/files tab'''
''Acquisitions'' and ''Cataloging'' staff only:
*In '''Templates''' section, click the box marked with an ellipsis to open the Select Template dialog
**Navigate to C:\Program Files\Voyager\Catalog\Template (it may open straight to the Catalog folder)
**Select the matching templates (.tem files) for Bib, Hldg, and Auth respectively
 
'''Mapping''' tab
*Local Import: '''MARC21 MARC-8 (non-Unicode)'''
*MARC mapping: Tag 500, subfield a
 
'''Colors/Fonts''' tab
 
Set according to personal preference, as long as "Font" choice is a Unicode font (e.g., Lucida Sans Unicode).
*Font sizes from 8 to 72 can be typed directly into the '''Font Size''' box, or you can pick from the limited drop-down menu
**CAUTION: the font size and bold/not-bold affects what you see on the screen ''and'' what prints out, so if you pick a huge font size, then print a record, it will take up a kazillion sheets of paper.


==Cataloging module==
==Cataloging module==
Before getting started, catalogers should navigate to '''Cataloging (I:)/Connexion/LocalSaveFiles''', and create a folder named with your initials, i.e. I:/Connexion/LocalSaveFiles/ABC, if you have not already done so. This is the folder where your import and export files will be stored by [[Connexion client options|Connexion]] and Voyager (see Folders/Files heading below).
These instructions cover settings for '''all users''' of the Cataloging module, not just catalolgers, except where indicated.
 
''Catalogers only:'' Before getting started, navigate to '''Cataloging (I:)/Connexion/LocalSaveFiles''', and create a folder named with your initials, e.g. I:/Connexion/LocalSaveFiles/ABC, if you have not already done so. This is the folder where your import and export files will be stored by [[Connexion client options|Connexion]] and Voyager (see Folders/Files heading below). Once you have a local save folder, go to Options > Preferences in the relevant Voyager module.
 
''Everyone:'' From the top menu bar, select Options > Preferences and set the following options:
 
'''General tab'''
*If you mostly work with Open stacks books
**Holding/item default location: '''DeckB-Open stacks'''
**Call number hierarchies: '''Modern-LC'''
**Bibliographic import/replace profile: '''Modern''' or '''Replace on 035 match'''
**Bib Overlay import/replace profile: '''(none)'''
**Authority import/replace profile: '''LCNAF'''
*If you mostly work with Vault materials
**Holding/item default location: '''DeckC-Vault''' (or other vault, if appropriate)
**Call number hierarchies: '''Rare-Acc'''
**Bibliographic import/replace profile: '''Replace on 035 match'''
**Bib Overlay import/replace profile: '''(none)'''
**Authority import/replace profile: '''LCNAF'''
*Check boxes for "Delete records from work/import files..." if preferred
*Check box for "Add a subfield 'a' to a new field" if preferred (this will depend on what type of editing you do most frequently in Voyager)<br>
 
'''Validation tab'''
*Cataloging formats: '''MARC21'''
*''Collection Description staff'' check-mark these boxes:
**Bypass MARC Validation
**Bypass Authority Control validation
**Bypass ISBN validation
**Bypass ISSN validation
 
*''Other staff:'' check-mark these boxes (that is, same as above except ''also'' "Character set validation"):
**Bypass MARC Validation
**Bypass MARC21 Character set validation
**Bypass Authority Control validation
**Bypass ISBN validation
**Bypass ISSN validation<br>
'''Workflow tab'''
 
Check-mark the following (optional where indicated):
* (''optional'') Retain last search
*Automatic truncation for non keyword searches
*Display record directly if search results in only one title
* Check for Duplicate Item Barcodes
* (''optional'')  Suppress confirmation message upon successul save
* Update permanent location of attached items when MFHD is saved to the database
* Update item type of attached items when MFHD is saved to the database...<br>
 
'''Item defaults tab'''
*Select a default Item Type according to what material you work with most frequently (or leave blank if this varies).<br>
 
'''Folders/files tab'''
''Acquisitions'' and ''Cataloging'' staff only:
*In '''Templates''' section, click the box marked with an ellipsis to open the Select Template dialog
**Navigate to C:\Program Files\Voyager\Catalog\Template (it may open straight to the Catalog folder)
**Select the matching templates (.tem files) for Bib, Hldg, and Auth respectively
*In '''Work Files''' section, click the ellipsis box to open the Select Work File dialog, if applicable
**''Catalogers'': generally not used, except for certain intern projects<br>
 
'''Mapping''' tab
*Local Import: '''MARC21 MARC-8 (non-Unicode)'''<br>


Once you have a local save folder, go to Options > Preferences in the relevant Voyager module.
'''Colors/Fonts''' tab
Set according to personal preference, as long as "Font" choice is a Unicode font (e.g., Lucida Sans Unicode).
*Font sizes from 8 to 72 can be typed directly into the '''Font Size''' box, or you can pick from the limited drop-down menu
**CAUTION: the font size and bold/not-bold affects what you see on the screen ''and'' what prints out, so if you pick a huge font size, then print a record, it will take up a kazillion sheets of paper.


From the top menu bar, select Options > Preferences. '''General''' settings will vary depending on whether the cataloger works mainly with Vault materials or open stacks materials. Other settings are based on personal preference, except where specified below.
==Circulation==
'''Alerts, Printing and Fine/Fee/Demerit'''
Set according to role.
*When working with patrons, most of the settings in the 'Alerts' section should be checked, <i>except</i> for Patron Fine Fee Alerts and Short Loan Advanced Booking Alert.
*When not working with patrons, most alerts can be unchecked, <i>except</i> for Enable default button selection.  
*No other options are changed on this tab.  


*'''General''' tab
'''Items and Searching'''
**Open stacks books
*check Check for Duplicate Item Barcodes
***Holding/item default location: '''DeckB-Open stacks'''
*check Bypass ISBN validation
***Call number hierarchies: '''Modern-LC'''
*check Bypass ISSN validation
***Bibliographic import/replace profile: '''Modern''' or '''Replace on 035 match'''
*check Title Search - Auto Truncation
***Authority import/replace profile: '''LCNAF'''
*check Title Search - Retain Last Search
**Vault materials
*Default Patron Search should be Name
***Holding/item default location: '''DeckC-Vault''' (or other vault, if appropriate)
***Call number hierarchies: '''Rare-Acc'''
***Bibliographic import/replace profile: '''Replace on 035 match'''
***Authority import/replace profile: '''LCNAF'''
**Check boxes for "Delete records from work/import files..." if preferred
**Check box for "Add a subfield 'a' to a new field" if preferred (this will depend on what type of editing you do most frequently in Voyager)
*'''Validation''' tab
**Cataloging formats: '''MARC21'''
**Check boxes for "Bypass MARC21 Character set validation", "Bypass Authority Control validation", "Bypass ISBN validation", and "Bypass ISSN validation". Starting in summer 2016, do not select "Bypass MARC validation."
*'''Workflow''' tab
**Boxes for "Automatic truncation for non-keyword searches" and "Check for duplicate item barcodes" should always be checked to ensure correct search results. Other boxes can be checked according to personal preference.
***Note: if you are frequently [[Pre-1831 transfer books|transferring books to Cage]], unselect "Check for duplicate item barcodes."
**The boxes "Update permanent location of attached items..." and "Update item type of attached items..." are optional, but are very useful and are recommended.
*'''Item defaults''' tab
**Select a default Item Type according to what material you work with most frequently (or leave blank if this varies).
*'''Folders/files''' tab
**In '''Templates''' section, click the box marked with an ellipsis to open the Select Template dialog
***Navigate to C:\Program Files\Voyager\Catalog\Template (it may open straight to the Catalog folder)
***Select the matching templates (.tem files) for Bib, Hldg, and Auth respectively
**In '''Work Files''' section, click the ellipsis box to open the Select Work File dialog
***Navigate to I:\Connexion\LocalSaveFiles\[your initials], enter a name for your default .bib file, and click "Open" to create the .bib file.
*'''Mapping''' tab
**Local Import: '''MARC21 MARC-8 (non-Unicode)'''
*'''Colors/Fonts''' tab
**Set according to personal preference, as long as it's a Unicode font (e.g., Arial Unicode).
**Font sizes from 8 to 72 can be typed directly into the '''Font Size''' box, or you can pick from the limited drop-down menu.


==Circulation module==
(Information to come)


==See also==
==See also==

Latest revision as of 10:48, 24 May 2022

Ambox notice.png This page refers to the Voyager ILS, an Ex Libris product used at the Folger from 1996 to 2022.

For current documentation on using the catalog, see Category:Catalog.
For current documentation on staff use of the ILS, see Category:TIND ILS.


Use the settings below to customize Voyager when getting started for the first time, or setting up Voyager on a new computer. The Cataloging module settings are based on the Voyager 9.1 interface, and are current as of June 2016. The Acquisitions module and Cataloging module for Acquisitions staff settings, and the Circulation settings, are based on the Voyager 10.1 interface, and are current as of January 2020.

Acquisitions module

Session defaults

  • purchase order
    • Ship to Acquisitions Department
    • Bill to: Acquisitions Department
  • Line item copies/funds
    • Intended location: DeckB-Open Stacks (or DeckC-Vault or other vault)
    • For this location:
      • number of copies: 1
      • ship to Acquisitions Department
      • Commit to fund: Acq 19-20/Modern (update for year and fund as appropriate)
  • Holdings
    • point to default holdings template: C:\Program Files (x86)\Voyager\Catalog\Template\hold.tem

Workflows

  • searching
    • Bibliographic Staff Searching/Import
      • check retain last search
      • check automatic truncation
      • character set: Latin-1 unicode
    • Line items
      • check Auto-select all copies during receive
      • default extended fund allocation method: percentage
    • serials check-in
      • check auto-select all copies during receive
      • check Prompt to print Bindery Pullslips
    • Bibliographic standard number
      • check Bypass ISBN validation
      • check Bypass ISSN validation
      • check Bypass ISBN validation for EDI message
      • check Bypass ISSN validation for EDI message

Cataloging module settings for Acquisitions staff

General tab

  • If you mostly work with Open stacks books
    • Holding/item default location: DeckB-Open stacks
    • Call number hierarchies: Modern-LC
    • Bibliographic import/replace profile: Add unconditional
    • Bib Overlay import/replace profile: (none)
    • Authority import/replace profile: LCNAF
  • If you mostly work with Vault materials
    • Holding/item default location: DeckC-Vault (or other vault, if appropriate)
    • Call number hierarchies: Rare-Acc
    • Bibliographic import/replace profile: Add unconditional
    • Bib Overlay import/replace profile: (none)
    • Authority import/replace profile: LCNAF
  • Check Delete records from work files...
  • Check Delete records from import file...
  • Check box for "Add a subfield 'a' to a new field" if preferred (this will depend on what type of editing you do most frequently in Voyager)

Validation tab

  • Cataloging formats: MARC21
  • Check-mark these boxes:
    • Bypass MARC Validation
    • Bypass MARC21 Character set validation
    • Bypass Authority Control validation
    • Bypass decomposition of accented characters for MARC21
    • Bypass ISBN validation
    • Bypass ISSN validation

Workflow tab Check-mark the following:

  • Retain last search
  • Automatic truncation for non keyword searches
  • Display record directly if search results in only one title
  • Check for Duplicate Item Barcodes
  • (optional) Suppress confirmation message upon successful save
  • Update permanent location of attached items when MFHD is saved to the database
  • Update item type of attached items when MFHD is saved to the database...
  • Retain hierarchy selections

Item defaults tab

  • Select a default Item Type according to what material you work with most frequently (or leave blank if this varies).

Folders/files tab Acquisitions and Cataloging staff only:

  • In Templates section, click the box marked with an ellipsis to open the Select Template dialog
    • Navigate to C:\Program Files\Voyager\Catalog\Template (it may open straight to the Catalog folder)
    • Select the matching templates (.tem files) for Bib, Hldg, and Auth respectively

Mapping tab

  • Local Import: MARC21 MARC-8 (non-Unicode)
  • MARC mapping: Tag 500, subfield a

Colors/Fonts tab

Set according to personal preference, as long as "Font" choice is a Unicode font (e.g., Lucida Sans Unicode).

  • Font sizes from 8 to 72 can be typed directly into the Font Size box, or you can pick from the limited drop-down menu
    • CAUTION: the font size and bold/not-bold affects what you see on the screen and what prints out, so if you pick a huge font size, then print a record, it will take up a kazillion sheets of paper.

Cataloging module

These instructions cover settings for all users of the Cataloging module, not just catalolgers, except where indicated.

Catalogers only: Before getting started, navigate to Cataloging (I:)/Connexion/LocalSaveFiles, and create a folder named with your initials, e.g. I:/Connexion/LocalSaveFiles/ABC, if you have not already done so. This is the folder where your import and export files will be stored by Connexion and Voyager (see Folders/Files heading below). Once you have a local save folder, go to Options > Preferences in the relevant Voyager module.

Everyone: From the top menu bar, select Options > Preferences and set the following options:

General tab

  • If you mostly work with Open stacks books
    • Holding/item default location: DeckB-Open stacks
    • Call number hierarchies: Modern-LC
    • Bibliographic import/replace profile: Modern or Replace on 035 match
    • Bib Overlay import/replace profile: (none)
    • Authority import/replace profile: LCNAF
  • If you mostly work with Vault materials
    • Holding/item default location: DeckC-Vault (or other vault, if appropriate)
    • Call number hierarchies: Rare-Acc
    • Bibliographic import/replace profile: Replace on 035 match
    • Bib Overlay import/replace profile: (none)
    • Authority import/replace profile: LCNAF
  • Check boxes for "Delete records from work/import files..." if preferred
  • Check box for "Add a subfield 'a' to a new field" if preferred (this will depend on what type of editing you do most frequently in Voyager)

Validation tab

  • Cataloging formats: MARC21
  • Collection Description staff check-mark these boxes:
    • Bypass MARC Validation
    • Bypass Authority Control validation
    • Bypass ISBN validation
    • Bypass ISSN validation
  • Other staff: check-mark these boxes (that is, same as above except also "Character set validation"):
    • Bypass MARC Validation
    • Bypass MARC21 Character set validation
    • Bypass Authority Control validation
    • Bypass ISBN validation
    • Bypass ISSN validation

Workflow tab

Check-mark the following (optional where indicated):

  • (optional) Retain last search
  • Automatic truncation for non keyword searches
  • Display record directly if search results in only one title
  • Check for Duplicate Item Barcodes
  • (optional) Suppress confirmation message upon successul save
  • Update permanent location of attached items when MFHD is saved to the database
  • Update item type of attached items when MFHD is saved to the database...

Item defaults tab

  • Select a default Item Type according to what material you work with most frequently (or leave blank if this varies).

Folders/files tab Acquisitions and Cataloging staff only:

  • In Templates section, click the box marked with an ellipsis to open the Select Template dialog
    • Navigate to C:\Program Files\Voyager\Catalog\Template (it may open straight to the Catalog folder)
    • Select the matching templates (.tem files) for Bib, Hldg, and Auth respectively
  • In Work Files section, click the ellipsis box to open the Select Work File dialog, if applicable
    • Catalogers: generally not used, except for certain intern projects

Mapping tab

  • Local Import: MARC21 MARC-8 (non-Unicode)

Colors/Fonts tab Set according to personal preference, as long as "Font" choice is a Unicode font (e.g., Lucida Sans Unicode).

  • Font sizes from 8 to 72 can be typed directly into the Font Size box, or you can pick from the limited drop-down menu
    • CAUTION: the font size and bold/not-bold affects what you see on the screen and what prints out, so if you pick a huge font size, then print a record, it will take up a kazillion sheets of paper.

Circulation

Alerts, Printing and Fine/Fee/Demerit Set according to role.

  • When working with patrons, most of the settings in the 'Alerts' section should be checked, except for Patron Fine Fee Alerts and Short Loan Advanced Booking Alert.
  • When not working with patrons, most alerts can be unchecked, except for Enable default button selection.
  • No other options are changed on this tab.

Items and Searching

  • check Check for Duplicate Item Barcodes
  • check Bypass ISBN validation
  • check Bypass ISSN validation
  • check Title Search - Auto Truncation
  • check Title Search - Retain Last Search
  • Default Patron Search should be Name


See also